FULL MOUTH DENTAL IMPLANTS

Full Mouth Dental Implants is a full mouth rehabilitation with 6-8 dental implants for good bone…

What is All-On-6?

Six implants placed in a completely teeth-less jaw, providing a secure and optimal support for a fixed bridge/denture. It is the most Comprehensive, Successful, Safe, Simpler implant supported fixed teeth protocol for completely missing teeth.

Why All-On-6 (Full Mouth Dental Implants)?

Using Nobel Biocare (Sweden) / Alpha Bio (England) / Alphadent (Netherlands) Implants with Life Time Warranty (Scientifically documented over a decade).
Upto 14 fixed metal free Zirconium ceramic teeth per jaw.
If more than 35N torque achieved on placement of implants.

Phases of All-on-6 Dental Implant Procedure

The entire process of treatment includes two phases. However, after your first visit, your ugly, broken teeth will be gone, you will have your implants in place, and you will leave smiling with a beautiful temporary set of teeth.
Phase I:
– Diagnosis and planning with panoramic x-rays/ CBCT scans

– Necessary health checks.
– Tooth extraction (if required) and dental implant placement, followed by immediate provisional denture (fixed).

Phase II:
The temporary bridge is replaced with the final full mouth metal free Zirconium crown and Bridge.

Benefits of All-on-6 Immediate Function Dental Implants

Suitable for almost all bone quantities.
None or very small bone graft required.
Simple and good predictability from a surgical perspective
Well-balanced prosthetic support for an immediate function procedure
Attractive prosthetic solution, Immediate Function & fixed prosthesis
No healing time required prior to functioning
Fast , fixed and cost effective.
It is one of the best implant supported fixed teeth protocol

All-on-8

On the first visit, the implant team clinically examines the patient, followed by necessary X-rays taken for preliminary assessment. A 3D CBCT Scan (FMS has an in-house CBCT scan facility) if required, will be performed for precision planning. A virtual placement of implants will be demonstrated to the patient on the 3D CBCT SCAN, before finalizing the treatment plan. As a part of the treatment planning, the technique, cost factor and different fixed teeth options will be explained to the patient.

All-on-6

All-on-4

Zygoma Implants

Permanent teeth in 5 days

The permanent ceramic teeth are custom prepared and fixed within 5 days.

Thus the timeline for Permanent-fixed teeth-in-5 days is completed within one trip. At FMS, we place 8 to 10 implants to restore the upper jaw and 6 to 8 implants for the lower jaw. The technique includes a combination of compression implants, basal implants and pterygoid implants. With this combination, every patient receives a full set of fixed teeth, without any bone graft procedure, sinus lift or nerve repositioning, that too with a lifetime warranty.

Why is Permanent-fixed teeth-in-5 days protocol so successful at FMS?

Vast experience of the multispecialty implant team, close to 2 decades, with thousands of implants placed, a big percentage of which includes immediate loading implants.
Constant collaborations with leaders in immediate loading implants, IHDE Dental Switzerland and their associates. FMS has standardized the rehabilitation of edentulous jaws, using this wonderful technique which is based on basal implants and immediate loading implants.
With an in-house 3D CBCT SCAN, every implant planning and placement is done with ultimate precision. Hi-tech CAD-CAM supported, in house dental laboratory with 20 versatile and artistic dental technicians, in team with 2 high profile Prosthodontists (tooth replacement specialists) make sure you get the most natural looking, functional teeth in just 5 days time.
There are 9 branches of FMS in Hyderabad city, but advanced implant treatments are performed only in a dedicated Implant center. No general dental treatments are done in this zone. It means that implant treatments are done with high stanadards of sterilization and state-of-the-art equipments.
Even though every practitioner claims painless/ stress less placement of implants, we believe that full mouth implant placement needs more attention as far as the stress factor is concerned. To overcome this issue, the implant centre is equipped with conscious sedation machines, general anesthesia facility and a senior anesthetist on call.
The implant centre even has inpatient facilities, if you prefer round the clock attention and surely some savings on your accommodation.

Advantages of Permanent-fixed-teeth-in-5 days protocol using KOS, BCS, BOI implants.

The BCS implants can be placed immediately after extraction.
KOS, BCS and BOI Implants are designed to be immediately loaded. That means permanent teeth (not removable dentures) can be fixed in 5 days.
This implant system heals faster, when they are loaded immediately, so no waiting for 3-6 months, for Osseointegration.
As these are single piece implants, so no screw loosening, less chance of peri-implantitis.
These implants can be placed flapless (except BOI, which needs a gum incision and suturing) so more patient comfort and faster healing assured.
BCS and BOI (basal) implants are smooth surface implants. The advantages of smooth surface implants are-more resistant to infections-less maintenance needed-less bone resorption around implants-less risk of peri-implantitis…(which is a major reason for implant failure )
This protocol can be performed in controlled diabetic patients, smokers and patients with severe gum disease with equal success.
In a single visit….both extraction and implant can be completed. So, a single surgical visit is required, compared to a two-staged implant protocol, thus avoiding multiple surgeries.
These implants are from highly reputed IHDE DENTAL, a SWISS company which is known for its perfection.
All patients can enjoy the benefits of permanent fixed bridges on implants within 5 days.
This improvised technique is equally reliable as the traditional techniques.
This protocol can often be used to replace a single tooth, several teeth, or a full mouth of teeth, upper or lower, with remarkable comfort, predictability and aesthetics.
The Permanent-fixed teeth-in-5 days protocol is completed in a single trip.

Comparison of different implant treatment techniques at FMS

Versatility of the implant team is very crucial in implant treatment planning and execution.
No single implant procedure is ideal for every clinical situation. Many of the known implant practitioners perform only a single technique for every situation, because they are only familiar to that one technique. They not only promote that technique, they even put down other modalities. This is lack of expertise and knowledge.
No technique is superior to any other technique. The fact is that, different techniques and approaches are required for different clinical situations, for the ultimate success of implant.

Single or multiple teeth replacement

The risk factor of immediate crown in single implants is slightly higher compared to multiple implants. As such, in very few cases of single implants, we may place a temporary crown for 2-3 months and the permanent ceramic crown is then replaced later.

#	Permanent-fixedteeth-in-5days	All-on-4	All-on-6 / 8	Zygomatic implant
Relative risk of failure	Less risk, lifetime warranty	Less risk, lifetime warranty.	Less risk, lifetime warranty.	Mild risk of sinus infection, life time warranty
Cantilevers	No cantilevers required	Technique designed for cantilevers on either side	No cantilevers required	Technique designed for cantilevers on either side
Type of prosthesis	Metal Ceramic or Zirconium Ceramic Crown & Bridge	Acrylic (initial), Final prosthesis with Titanium Hybrid Denture or Procera Implant Bridge	Metal Ceramic or Zirconium Ceramic Crown & Bridge	Acrylic (initial), Final prosthesis with Titanium Hybrid Denture or Procera Implant Bridge
Type of implants	Single piece Implants. Combination of compression screw, Basal Implants and Pterygoid Implants are used.	Two piece implants	Single piece Implants /Two piece implant	Two piece implants
Screw loosening	No screw loosening, since single piece implants used	Screw loosening rarely a problem. But has an advantage of unscrewing the prosthesis to clean and polish	Combination	Screw loosening rarely a problem. But has an advantage of unscrewing the prosthesis to clean and polish
Infections	Mild risk	Mild risk	Mild risk	Mild risk of Sinus infection
No of implants	6-8 for lower jaw. 8-10 for upper jaw.	4- 5 implants	6-8 implants	4-6 implants for upper jaw
No of teeth	12-14 teeth in each jaw. Teeth replaced till second molar	10 teeth (intial) 12-14 teeth (final)	12-14 teeth in each jaw. Teeth replaced till second molar	10 teeth (intial) 12-14 teeth (final)
No of trips	One trip, as permanent ceramic crown or bridge is placed in 5 days	Two trips. Final teeth fixed after 3-6 months of implant placement.	One/Two trips.	Two trips. Final teeth fixed after 3-6 months of implant placement.
Dental lab support	FMS in house CAD-CAM Dental Lab support	FMS in house CAD-CAM Dental Lab support	FMS in house CAD-CAM Dental Lab support	FMS in house CAD-CAM Dental Lab support

#	Permanent-fixedteeth-in-5days	All-on-4
Relative risk of failure	Less risk, lifetime warranty	Less risk, lifetime warranty.
Cantilevers	No cantilevers required	Technique designed for cantilevers on either side
Type of prosthesis	Metal Ceramic or Zirconium Ceramic Crown & Bridge	Acrylic (initial), Final prosthesis with Titanium Hybrid Denture or Procera Implant Bridge
Type of implants	Single piece Implants. Combination of compression screw, Basal Implants and Pterygoid Implants are used.	Two piece implants
Screw loosening	No screw loosening, since single piece implants used	Screw loosening rarely a problem. But has an advantage of unscrewing the prosthesis to clean and polish
Infections	Mild risk	Mild risk
No of implants	6-8 for lower jaw. 8-10 for upper jaw.	4- 5 implants
No of teeth	12-14 teeth in each jaw. Teeth replaced till second molar	10 teeth (intial) 12-14 teeth (final)
No of trips	One trip, as permanent ceramic crown or bridge is placed in 5 days	Two trips. Final teeth fixed after 3-6 months of implant placement.
Dental lab support	FMS in house CAD-CAM Dental Lab support	FMS in house CAD-CAM Dental Lab support

#	All-on-6 / 8	Zygomatic implant
Relative risk of failure	Less risk, lifetime warranty.	Mild risk of sinus infection, life time warranty
Cantilevers	No cantilevers required	Technique designed for cantilevers on either side
Type of prosthesis	Metal Ceramic or Zirconium Ceramic Crown & Bridge	Acrylic (initial), Final prosthesis with Titanium Hybrid Denture or Procera Implant Bridge
Type of implants	Single piece Implants /Two piece implant	Two piece implants
Screw loosening	Combination	Screw loosening rarely a problem. But has an advantage of unscrewing the prosthesis to clean and polish
Infections	Mild risk	Mild risk of Sinus infection
No of implants	6-8 implants	4-6 implants for upper jaw
No of teeth	12-14 teeth in each jaw. Teeth replaced till second molar	10 teeth (intial) 12-14 teeth (final)
No of trips	One/Two trips.	Two trips. Final teeth fixed after 3-6 months of implant placement.
Dental lab support	FMS in house CAD-CAM Dental Lab support	FMS in house CAD-CAM Dental Lab support

Most Awarded Dental Clinic

FMS DENTAL is awarded with 50+ Awards in 5 years. Rated #1 Dental CLinic in India by GCR (Global Clinic Rating)

[email protected]

phone

+91 888 506 0780

FULL MOUTH DENTAL IMPLANTS

What is All-On-6?

Why All-On-6 (Full Mouth Dental Implants)?

Phases of All-on-6 Dental Implant Procedure

Benefits of All-on-6 Immediate Function Dental Implants

All-on-8

Permanent teeth in 5 days

Why is Permanent-fixed teeth-in-5 days protocol so successful at FMS?

Advantages of Permanent-fixed-teeth-in-5 days protocol using KOS, BCS, BOI implants.

Comparison of different implant treatment techniques at FMS

Single or multiple teeth replacement

Most Awarded Dental Clinic

BOOK NOW

Experts Are Here to Help You!!

Follow Us

LATEST BLOGS

Quick Links

bRANCHES

Copyright 2024 © All rights Reserved. Design by Team FMS